Shaping DIY Climbing Holds Pt. 3 – CRIMPS and Adding Bolt Holes

The second shaping video in the DIY Climbing Hold series where we fill in the hold set and add a new crimp to the mix of shapes. We also start to prep for the production stage by adding in bolt holes and set screw placements.

Here is the previous video/part two of this series

…or check out all the posts/videos in this series

Here is the next video/part four of this series

If you haven’t seen our wall build series so far/you want a wall to make some holds for, you can find it here.

🛒 DIY Climbing Hold Materials:
*Resin
*Mold making materials – I used a different product in the video
*Mold Release
*All in one kit (low volume)
*Large Stir Sticks
*Small Stir Sticks
*Measuring Cups
*Gram Scale
ONE-TIME 10% OFF COUPON CODE: sendstory10

*Foam for shaping
*Alt. Mold Release

🛒 Shaping Tools/Other Items:
*Climbing Bolts
*Box Cutter
*Varied Rasps
*Sanding Foam/Sponge
*Assorted Grit Sand Paper
*Hot Glue + Gun
*Compressed Air

🛒 Climbing Wall Materials:
*Climbing Bolts
*T-Nuts

*These are affiliate links that help us out. Thanks!

https://www.patreon.com/SendStory
We plan on continuing to post more content to our youtube channel and instagram account so if you are interested in following along, please like and subscribe for more!

Leave a Reply

Your email address will not be published. Required fields are marked *