Here is the FOURTH video in the DIY Climbing Hold series where we setup the shapes for molds and pour the silicone. We also discuss more about the production process and set ourselves up for the best outcomes with *hopefully* the least amount of effort.
Here is the previous video/part three of this series
Here is the next video/part five of this series
…or check out all the posts/videos in this series
If you haven’t seen our wall build series so far/you want a wall to make some holds for, you can find it here.
🛒 DIY Climbing Hold Materials:
*Resin
*Mold making materials – I used a different product in the video
*Mold Release
*All in one kit (low volume)
*Resin Dyes
*Large Stir Sticks
*Small Stir Sticks
*Measuring Cups
*Gram Scale
*All Climbing Products
ONE-TIME 10% OFF COUPON CODE: sendstory10
*Foam for shaping
*Alt. Mold Release
🛒 Shaping Tools/Other Items:
*Climbing Bolts
*Box Cutter
*Varied Rasps
*Sanding Foam/Sponge
*Assorted Grit Sand Paper
*Hot Glue + Gun
*Compressed Air
🛒 Climbing Wall Materials:
*Climbing Bolts
*T-Nuts
*These are affiliate links that help us out. Thanks!
https://www.patreon.com/SendStory
We plan on continuing to post more content to our youtube channel and instagram account so if you are interested in following along, please like and subscribe for more!